CCTV
Cameras attached to Microscopes: With the
LE-Adapter, you can mount your CCTV camera directly to the
eyepiece of most any microscope. You can now use your
standard monocular or binocular microscope without having
to purchase a triocular scope. No expensive relay lens is
required.
Using the LE-Adapter to
connect your CCTV camera to a monitor is simple, quick and
inexpensive in comparison to using the standard method of connecting a CCTV camera to a monitor.
Note: A lens of 25 mm focal length
or greater is required on both CCTV and Night Vision Scopes to eliminate
vignetting.
SLR
cameras: The LE-Adapter can be used on SLR
cameras that have a focal length equal to or longer than 80mm. The camera should
be operated in the Aperture preferred mode in the lowest f-stop setting so that
the lens won't close down and cause vignetting at higher f-stops settings. Use
of high (400) ASA film is suggested.
We highly recommend the use of a
tripod when attaching it to a terrestrial scope to a SLR camera.